Quantcast
Channel: Bios Mods -The Best BIOS Update and Modification Source - All Forums
Viewing all 25290 articles
Browse latest View live
↧

[HELP PLEASE] X11QPH+ and Xeon 8176 ES

August 23, 2019, 2:46 am
$
0
0
A CPU seller written: You need to flash a modded BIOS with B0 microcode, if you want to use Platinum 8176 Es in X11QPH+.


Please help me. How can i do it???
↧
Search

[Request] Asus N56VZ Unlock Request

August 26, 2019, 9:35 am
$
0
0
Hey can someone unlock it???
I want cpu and gpu ocing with voltage settings unlocked also thermal throttling settings.
I also want that one gpu setting to be set to Others instead of Windows7/windows vista
↧
↧

Looking for modded BIOS for MSI GS72 6QE laptop

August 26, 2019, 9:35 am
↧

Help with dump replacing Bios region

August 20, 2019, 7:41 am
$
0
0
Hi all! I ve a Sony Vaio Laptop, which wont boot, I think is a Bios problem because sometimes its boots (show POST and start windwos after like 5 hours) but most of the time doesnt even show POST (black screen)

The strange think is, once it boot into windows, I can use it perfectly and suspend it, but if I turn it off then Ive the same problem described above.

So, short story long, I managed to save a dump using Ch341 programmer, (verified dump), and also I got a BIOS from official site of Sony (Bios Update).

I will need, if someone can help me, to replace the Bios Region in my Dump with Bios region form Offical BIOS form Sony.

The files are attached.

Ty very much!!!

PS: I read a lot but cant figure out how to do the process of replacing BIOS region, if someone is willing to tell me or show me some tutorial It will be very appreciated.

.bin   Sony - Bios Dump.bin (Size: 8 MB / Downloads: 1)

.bin   Original Sony BIOS - R0250DA.bin (Size: 8.45 MB / Downloads: 1)
↧

socket replacement and bios chip problems

August 26, 2019, 2:13 pm
$
0
0
Have been playing with bios cross flashing and hot flashing.
Have got an asrock am2/am3 motherboard (n68S ucc) and successful flash to a similar am2/am3/am3+ motherboard (n68gs fx).
Board works as it did before with an athlon II 620, however does anyone know where I could get a replacement CPU socket (am3/am3+)? To then try an fx CPU.
Was thinking of buying some dead boards off eBay for this

Also have cross flashed a Packard bell 775 board to an ecs bios (also working well and more options etc in bios).
And An Acer t180 to abit bios. (having spare bios chips from old boards has come in handy).

One problem I have come across, is with a couple of winbond 25X80AVAIZ bios chips I have, they both fail the verification after being flashed. Would anyone know why this is? (I have tried them in three different boards, and each time they do the same)
↧
↧

[request] Unlock, if this possible at all, Lenovo v110-15isk BIOS

August 27, 2019, 12:57 am
$
0
0
Hi! Despite the fact that all my life I have been doing electronics and programming,
I'm afraid to hack something in my laptop.
Maybe someone can unlock the BIOS from my computer.
BIOS unpacked attached.
Thanks in advance.

.rar   1KCN47WW.rar (Size: 3.02 MB / Downloads: 0)
↧

Asus x556uj

August 20, 2019, 12:52 pm
$
0
0
Hi i am new in the forum and dont talk very well english...(i am spanish)

Asus x556uj is mbr/bios not uefi
Asus x556uj.413
https://dlcdnets.asus.com/pub/ASUS/nb/X5...JAS413.zip

I want to mod the bios to my asus x556uj for install a egpu with a exp gdc beast. I try unlock with AMIBCP 5.02.0031 (is aptio V of ami) and flashing with afuwin64 for aptio v without to much success. Something unlock but no everythin i need.  Later i found post in this web and try myself (without to much success again). I need tolud for memory, pcie link speed set to gen2 (i dont know if i need more i try to activate everythin in user). I try to modify with UEFItool extract as is the setup guid(maybe  FE612B72-203C-47B1-8560-A66D946EB371) with the photo of my bios and Hex editor to find the code. I try to much thins but i dont understand to much and i am affraid to bug my bios. 

my bios modified
http://www.mediafire.com/file/tcca0b7jct...9.rom/file

Please help my to unlock my bios.

.zip   bios fotos.zip (Size: 5.56 MB / Downloads: 4)
↧

[Request] Unlock Phoenix bios 1.08

August 27, 2019, 2:29 am
$
0
0
Hello everyone,

I tried myself to unlock the bios to access the intel menu but with no luck. I would really appreciate it, if someone could help me with it. The bios I need is for Acer Aspire 5735z. I tried to load a mod version 1.10 but the PH1614 program says something about platform mismatch or so and won't update. I assume that is due to the fact  that the 1.10 bios I found in this forum is for 5735 model and not for 5735z. So that's why I want to load a mod of 1.08 version. Thank you in advance for your support!
↧
Search

[Request] Acer Aspire 5735z: Unlock Phoenix bios 1.08

August 27, 2019, 2:29 am
$
0
0
Hello everyone,

I tried myself to unlock the bios to access the intel menu but with no luck. I would really appreciate it, if someone could help me with it. The bios I need is for Acer Aspire 5735z. I tried to load a mod version 1.10 but the PH1614 program says something about platform mismatch or so and won't update. I assume that is due to the fact  that the 1.10 bios I found in this forum is for 5735 model and not for 5735z. So that's why I want to load a mod of 1.08 version. Thank you in advance for your support!
↧
↧

Asus x556uj

August 20, 2019, 12:52 pm
$
0
0
Hi i am new in the forum and dont talk very well english...(i am spanish)

Asus x556uj is mbr/bios not uefi
Asus x556uj.413
https://dlcdnets.asus.com/pub/ASUS/nb/X5...JAS413.zip

I want to mod the bios to my asus x556uj for install a egpu with a exp gdc beast. I try unlock with AMIBCP 5.02.0031 (is aptio V of ami) and flashing with afuwin64 for aptio v without to much success. Something unlock but no everythin i need.  Later i found post in this web and try myself (without to much success again). I need tolud for memory, pcie link speed set to gen2 (i dont know if i need more i try to activate everythin in user). I try to modify with UEFItool extract as is the setup guid(maybe  FE612B72-203C-47B1-8560-A66D946EB371) with the photo of my bios and Hex editor to find the code. I try to much thins but i dont understand to much and i am affraid to bug my bios. 

my bios modified
http://www.mediafire.com/file/tcca0b7jct...9.rom/file

Please help my to unlock my bios.

.zip   bios fotos.zip (Size: 5.56 MB / Downloads: 4)
↧

[HELP] Acer E1-421- Lost DMI information

August 27, 2019, 8:46 am
$
0
0
I flashed an unlocked bios and i noticed that bios no longer shows Serial Number, Product Name and in place of uuid it shows ffffffffffffffff
Any help would be appreciated
↧

[REQUEST]Lenovo G50-70 UNLOCKED BIOS

August 27, 2019, 9:08 am
↧

Asus P5PL2-E Core2 Quad Q6700 Support

August 20, 2019, 11:47 pm
$
0
0
Hi Guys,

I have an Asus P5PL2-E motherboard with bios version 1002 (last ever) without Core2 Quad CPU Support
Recently I have found that it is possible to run a Core2 Quad Q6700 on it
So I went for it and bought one
I have installed the Core 2 Quad Q6700 and it completely works and boots into OS.
The problem is the motherboard only detects 3 cores of the cpu instead of all four (both in the bios and os it shows 3 for the number of cores)
and when booting, bios shows: Intel CPU uCode loading error
Is it possible to add full support by adding microcode or doing something else?

Official Bios Link:
https://dlcdnets.asus.com/pub/ASUS/mb/so...S-1002.zip

CPU Spec Code:
SLACQ

.rom   P5PL2-E-ASUS-1002.ROM (Size: 512 KB / Downloads: 0)

.jpg   CPU-Z CPU P5PL2-E.jpg (Size: 83.22 KB / Downloads: 5)

.jpg   CPU-Z MB P5PL2-E.jpg (Size: 62.97 KB / Downloads: 3)

.jpg   Aida64 CPUID P5PL2-E.jpg (Size: 63.82 KB / Downloads: 1)

.jpg   Bios uCode Error.jpg (Size: 227.99 KB / Downloads: 3)
↧
↧

Unlocked Gigabyte Aero 15X v8 (FB0A)

August 28, 2019, 8:27 am
$
0
0
Disclaimer: Do this at your OWN RISK! I will not be held responsible for anyone bricking their machine!

I made the mods based on @Lost_N_BIOS's post here and by following the How-2-Rip-It-Open-Yourself guide here.

Make sure you have your Aero's BIOS flashed to version FB0A using the official release on the Gigabyte website here before attempting the following.

First you must run command prompt (as Administrator) and run "FPTw.exe -bios -d biosreg.bin". You can get FPTw.exe from Intel CSME System Tools v12 r18 (located in the "Flash Programming Tool" folder).

Next you will need to run UEFITool 0.26.0 and open biosreg.bin. Select File->Search... Text tab and enter AMITSE. A list of search results will show at the bottom. Double click on "Unicode text "AMITSE" found in User interface section at offset 0h". Right click on the "PE32 image section" and select "Replace as is...". Browse to the (unzipped) file attached (Section_PE32_image_AMITSE_AMITSE.zip). File->Save image file... and call it biosmod.bin.

[Image: 82E3uSV.jpg]

Then you need to run AMIBCP 5.02.0031 and open biosmod.bin to set the menu access to USER like so:

[Image: BnkU0RW.jpg]

Once you File->Save run "FPTw.exe -bios -f biosmod.bin".

If you get the following error:
Quote:Error 167: Protected Range Registers are currently set by BIOS, preventing flash access.

This is caused by the BIOS Lock variable set to 0x01 (Enabled):
Code:
BIOS Lock, VarStoreInfo (VarOffset/VarName): 0xA12

How to set the BIOS Lock variable to 0x00 (Disabled):
1. Make sure you have following values set in BIOS:
  - Legacy Support: Disable
  - Secure Boot: Disable
2. Take USB stick and format to FAT32
3. Create directory structure EFI\Boot
4. Download and unzip bootx64.7z
5. Put BOOTX64.EFI into Boot directory
6. Boot from this USB stick
7. Run command: setup_var 0xA12 0x00
8. Run command: reboot

Attempt to write the modified BIOS again using FPTw.exe.
[Image: 3DjEixT.png]

If successful this time run "FPTw.exe -greset" to reboot.

Press F2 to enter BIOS you should (hopefully) be greeted with some extra menus...

[Image: 996ZBPr.jpg]
[Image: cmgZVn7.jpg]
[Image: KbyFZXm.jpg]

Big thanks to @Lost_N_BIOS!
↧

Gigabyte Aero 15X v8 (FB0A BIOS Unlocked)

August 28, 2019, 8:27 am
$
0
0
Disclaimer: Do this at your OWN RISK! I will not be held responsible for anyone bricking their machine!

I made the mods based on @Lost_N_BIOS's post here and by following the How-2-Rip-It-Open-Yourself guide here.

Make sure you have your Aero's BIOS flashed to version FB0A using the official release on the Gigabyte website here before attempting the following.

First you must run command prompt (as Administrator) and run "FPTw.exe -bios -d biosreg.bin". You can get FPTw.exe from Intel CSME System Tools v12 r18 (located in the "Flash Programming Tool" folder).

Next you will need to run UEFITool 0.26.0 and open biosreg.bin. Select File->Search... Text tab and enter AMITSE. A list of search results will show at the bottom. Double click on "Unicode text "AMITSE" found in User interface section at offset 0h". Right click on the "PE32 image section" and select "Replace as is...". Browse to the (unzipped) file attached (Section_PE32_image_AMITSE_AMITSE.zip). File->Save image file... and call it biosmod.bin.

[Image: 82E3uSV.jpg]

Then you need to run AMIBCP 5.02.0031 and open biosmod.bin to set the menu access to USER like so:

[Image: BnkU0RW.jpg]

Once you File->Save run "FPTw.exe -bios -f biosmod.bin".

If you get the following error:
Quote:Error 167: Protected Range Registers are currently set by BIOS, preventing flash access.

This is caused by the BIOS Lock variable set to 0x01 (Enabled):
Code:
BIOS Lock, VarStoreInfo (VarOffset/VarName): 0xA12

How to set the BIOS Lock variable to 0x00 (Disabled):
1. Make sure you have following values set in BIOS:
  - Legacy Support: Disable
  - Secure Boot: Disable
2. Take USB stick and format to FAT32
3. Create directory structure EFI\Boot
4. Download and unzip bootx64.7z
5. Put BOOTX64.EFI into Boot directory
6. Boot from this USB stick
7. Run command: setup_var 0xA12 0x00
8. Run command: reboot

Attempt to write the modified BIOS again using FPTw.exe.
[Image: 3DjEixT.png]

If successful this time run "FPTw.exe -greset" to reboot.

Press F2 to enter BIOS you should (hopefully) be greeted with some extra menus...

[Image: 996ZBPr.jpg]
[Image: cmgZVn7.jpg]
[Image: KbyFZXm.jpg]

Big thanks to @Lost_N_BIOS!
↧
Search

[Req] LenovoIPS300 Bios unlock ram limit

August 28, 2019, 11:14 am
$
0
0
Hi there, i have these hw configurations :

BIOS : 6DCN92WW(V8.06) SMBIOS Ver. 2.7 (already modded for WIFI Whitelist) (Bios attached to the thread) (Extracted with Universal BIOS Backup ToolKit 2.0)
CPU : i5-3337U, which supports up to 32GB Ram in intel specs
https://ark.intel.com/content/www/it/it/...0-ghz.html
MB Noth Bridge Chipset : Intel Ivy Bridge-MB IMC, which supports up to 16GB Ram in Aida64 specs (file attached at the thread)

Now i have installed

RAM : Ramaxel Technology DDR3 SO-DIMM 4096MBytes (4GB) PC3-12800 (set at freq 800 MHz) 204PIN
http://www.ramaxel.com/product/DOWN/book...W-1600.pdf

and i want to install

RAM : V7 DDR3 PC3-12800 204PIN 1.35V CL11
http://www.v7world.com/us/products/repla...bs-lv.html

when i plug it into the mobo, the pc doesn't start.

Any tips?

.rar   Reports.rar (Size: 55.08 KB / Downloads: 1)

.rar   LENOVO-6DCN92WW(V8.06).rar (Size: 2.77 MB / Downloads: 1)
↧

[REQUEST] Lenovo T450 BIOS unlock

August 29, 2019, 1:04 am
$
0
0
HI 

I HAVE A 450 LAPTOP 

I WANT TO INSTALL LTE MODULE. BUT WHITELIST BLOCKED..

WANT TO REMOVE OR BYPASS  WHITELIST ( WIFI / LCD ) -> WILL UPGRADE WITH FHD LCD

AND

CAN I SEE ADVANCED MENU?



HERE IS MY BIOS DUMP ( WORK WITH CH341A! )


------------ BIOS DUMP ----------------
https://drive.google.com/file/d/1Er69skV...sp=sharing
↧
↧

How to burn a HP bios on a IC ?

August 21, 2019, 10:25 am
$
0
0
Hello,

I bought a old HP Probook 640 G1.
My problem is the seller dont know the BIOS password. This password is not resetable via CMOS. Its stored in the IC (non volatile).
I asked already in the HP forums there seems to be a way to reset the password (SMC.bin) but HP wants 300$ for this file.
So this is not really a option to me.

The IC is a W25Q128FV Serial Flash Memory.
Datasheet : https://www.winbond.com/resource-files/w...bsite1.pdf

I have a programmer to programm this chip.
I unziped the original HP bios setup. And there is a .bin inside.
https://imgur.com/a/8NfZ2GB

Does hp encrypt they're bin files ? Do i have to decrpyt the bin file befor i can burn it   ?

Is it possible to add the original serial-sumber again on the BIOS ?
Is there somehting else that i need to know how to do this ?

Thanks for any help,
Regards Int3g3r
↧

[HELP] I bricked my acer E5-553-1786

August 29, 2019, 11:37 am
$
0
0
Hello, I have the following problem, update the BIOS of my Acer E5-553-1786, but I had a problem and it could not be updated well and now it does not start, the ACER icon is not shown, it is like brick I have seen in some forums that there is a method of recovering the BIOS through a USB memory and the file ZABA.fd.
I did the procedure for the recovery of the bios:
1. Format the USB memory in FAT32 format
2. I put the file ZABA.fd in the USB memory
3. I turn on my laptop with FN + ESC, the power LED flashes but the USB  LED don´t flash.

However nothing happens, in what I have read, they say that the ZABA.fd file must be renamed correctly so that the BIOS recovery can be done but I don't know how to get the correct name to continue the procedure.

Can you tell me if it is the right procedure?
Is there another method?
I need something?

Sorry if my English is poor. 

Thanks for your help.  Angel Rolleyes Sleepy
↧

Gigabyte Aero 15 v8 (FB0A BIOS Unlocked)

August 28, 2019, 8:27 am
$
0
0
Disclaimer: Do this at your OWN RISK! I will not be held responsible for anyone bricking their machine!

I made the mods based on @Lost_N_BIOS's post here and by following the How-2-Rip-It-Open-Yourself guide here.

Make sure you have your Aero's BIOS flashed to version FB0A using the official release on the Gigabyte website here before attempting the following.

First you must run command prompt (as Administrator) and run "FPTw.exe -bios -d biosreg.bin". You can get FPTw.exe from Intel CSME System Tools v12 r18 (located in the "Flash Programming Tool" folder).

Next you will need to run UEFITool 0.26.0 and open biosreg.bin. Select File->Search... Text tab and enter AMITSE. A list of search results will show at the bottom. Double click on "Unicode text "AMITSE" found in User interface section at offset 0h". Right click on the "PE32 image section" and select "Replace as is...". Browse to the (unzipped) file attached (Section_PE32_image_AMITSE_AMITSE.zip). File->Save image file... and call it biosmod.bin.

[Image: 82E3uSV.jpg]

Then you need to run AMIBCP 5.02.0031 and open biosmod.bin to set the menu access to USER like so:

[Image: BnkU0RW.jpg]

Once you File->Save run "FPTw.exe -bios -f biosmod.bin".

If you get the following error:
Quote:Error 167: Protected Range Registers are currently set by BIOS, preventing flash access.

This is caused by the BIOS Lock variable set to 0x01 (Enabled):
Code:
BIOS Lock, VarStoreInfo (VarOffset/VarName): 0xA12

How to set the BIOS Lock variable to 0x00 (Disabled):
1. Make sure you have following values set in BIOS:
  - Legacy Support: Disable
  - Secure Boot: Disable
2. Take USB stick and format to FAT32
3. Create directory structure EFI\Boot
4. Download and unzip bootx64.7z
5. Put BOOTX64.EFI into Boot directory
6. Boot from this USB stick
7. Run command: setup_var 0xA12 0x00
8. Run command: reboot

Attempt to write the modified BIOS again using FPTw.exe.
[Image: 3DjEixT.png]

If successful this time run "FPTw.exe -greset" to reboot.

Press F2 to enter BIOS you should (hopefully) be greeted with some extra menus...

[Image: 996ZBPr.jpg]
[Image: cmgZVn7.jpg]
[Image: KbyFZXm.jpg]

Big thanks to @Lost_N_BIOS!
↧
Viewing all 25290 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>