Quantcast
Channel: Bios Mods -The Best BIOS Update and Modification Source - All Forums
Viewing all 25011 articles
Browse latest View live

please remove

$
0
0
please remove this thread
I made a mistake by posting a unlock request in wrong subforum...

Unlock Insyde Bios mod for HP Pavilion G6 1d73us

[REQUEST] Packard Bell ixtreme M5740 P01-A4 - bios unlock

$
0
0
Hi
Can anyone help me and unlock this bios so that I am able to overclock my cpu?

Packard Bell ixtreme M5740 
P01-A4

file in attachments


Thanks in advance

.rom   AmericanMegatrendsInc.-P01-A4.rom (Size: 1 MB / Downloads: 0)

Request for advanced settings- HP Omen 17

$
0
0
Hi there. I'm looking for a BIOS update to show advanced settings so I can increase my Fan speed. When i updated the BIOS it runs at full speed but it doesn't when I'm gaming.

HP Omen 17 w200na
InsydeH20 set up utility Version 5.0
F.46

Please assist.

Thank you

[REQUEST] ACER NITRO 5 AN515-51 GAMING LAPTOP ADVANCED SETTINGS BIOS

$
0
0
HELLO,

I HAVE AN ACER NITRO 5 AN515-51 GAMING LAPTOP(INDIAN VERSION) RUNNING INSYDE H20 V1.13 REV 5.0 BIOS ATTACHED BELOW 

I WOULD LIKE TO UNLOCK ADVANCED SETTING IN THE BIOS AS ACER HAS WHITELISTED NVME SSD(ONLY M.2 SATA SSD WORK) SO PLEASE HELP GUYS

I KNOW MY BIOS IS WRITE PROTECTED AND I WOULD NEED SPI FLASHER/SOIC8 CLIP(WHICH I HAVE) SO I AM WILLING TO FLASH THE MODDED BIOS.

THANKS IN ADVANCE

BIOS

.bin   isflash.bin (Size: 8.76 MB / Downloads: 0)

My Lenovo S30 0568 did not boot and still on board screen display F2

$
0
0
Dears please help me 
My Lenovo s30 0568 did not boot and still on board screen display F2 code  two peep continuous
How this Happen 
1- I download the last firmware of bios the version from that can update from my windows 10, I installed the update as instruction and every think was OK, my PC restart and it boot very normal.
2- I downloaded the (Intel Management Engine Firmware Update Tool -  Systems for windows 7) and run it after less than a minute the tool got error and stop.
3- after that I install the software of Lenovo system update and run it, it download some package related to Intel engine or something like this, the tool ask for restart the pc, after restart, the pc boot with no screen and the code in board Lcd 62 code.
4- I do the reset Cmos procedure but the problem still.
5- I do the bios recovery from USB the screen show the bios recovery and update the bios done , the pc shutdown , I set the jumper to normal state but the pc boot with no screen again but the in board Lcd List "F2" with two peep and it hang in recovery mode while i reset the jumper in normal position 
So please help me to know what happen and what I do to solve this problem
Many thanks 

helping Unlock Lenovo yoga 520ikbr full unlock(advanced menu,power,etc

$
0
0
hi there....
i have here a brandnew Lenovo Yoga 520 IKBR with an i5 cpu (8.Generation)
i make some Hardware modifications now ist time to mod the Software!!
I have replaced the factory nvme and put a samsung 960 pro in it.
I have also replace the 8gb factory ram and now there is a 16GB Kingston 2400mhz CL13 in it.
I´ve done a Flash backup with the spi programmer(verified).the chip is Gigabit devices 25B64.

so finally i looking for someone who mod my bios because i want to set the xmp Settings of ram and adjusting the power Options
please can some one help...

i would make a donation for the work

[Request] HP 8470p Whitelist Removal

$
0
0
Hi!
I have HP 8470p laptop with BIOS Version: F.62 Rev.A.
And want to install WWAN Sierra 7710 modem.
But when I installed it, had a message: "Wireless module not supported (703)".

Understood, I need mod BIOS.
Used Forum search but nothing to found about this model of the laptop.

Could it possible to unlock HP 8470p?
Maybe it was done before and this mod BIOS exists?)

Thank you fo future help and answers!

Request helping Unlock Lenovo yoga 520ikbr full unlock(advanced menu,power,etc

$
0
0
hi there....
i have here a brandnew Lenovo Yoga 520 IKBR with an i5 cpu (8.Generation)
i make some Hardware modifications now ist time to mod the Software!!
I have replaced the factory nvme and put a samsung 960 pro in it.
I have also replace the 8gb factory ram and now there is a 16GB Kingston 2400mhz CL13 in it.
I´ve done a Flash backup with the spi programmer(verified).the chip is Gigabit devices 25B64.

so finally i looking for someone who mod my bios because i want to set the xmp Settings of ram and adjusting the power Options
please can some one help...

here is a link to the bios:
https://download.lenovo.com/consumer/mob...cn43ww.exe

i would make a donation for the work

Nec Versapro Vx-a - phoenix securecore bios

$
0
0
Is it possible to unlock my nec vx-a with phoenix bios.? i want to remove whitelist of pcie slot...  please help me
btw what is rw and slic 2.1? sorry newbie question... i need your help..

thanks!

.jpg   0_20180416_223654-1.jpg (Size: 228.09 KB / Downloads: 0)

Nec Versapro Vx-a - phoenix securecore bios

$
0
0
Is it possible to unlock my nec vx-a with phoenix bios.? i want to remove whitelist of pcie slot...  please help me
btw what is rw and slic 2.1? sorry newbie question... i need your help..

thanks!

.jpg   0_20180416_223654-1.jpg (Size: 228.09 KB / Downloads: 0)

[Request] Fujitsu U810/U1010 WhiteList Removal

Solved:Request helping Unlock Lenovo yoga 520ikbr full unlock(advanced menu,power,etc

$
0
0
hi there....
i have here a brandnew Lenovo Yoga 520 IKBR with an i5 cpu (8.Generation)
i make some Hardware modifications now ist time to mod the Software!!
I have replaced the factory nvme and put a samsung 960 pro in it.
I have also replace the 8gb factory ram and now there is a 16GB Kingston 2400mhz CL13 in it.
I´ve done a Flash backup with the spi programmer(verified).the chip is Gigabit devices 25B64.

so finally i looking for someone who mod my bios because i want to set the xmp Settings of ram and adjusting the power Options
please can some one help...

here is a link to the bios:
https://download.lenovo.com/consumer/mob...cn43ww.exe

i would make a donation for the work

[REQUEST] ACER NITRO 5 AN515-51 GAMING LAPTOP ADVANCED SETTINGS BIOS

$
0
0
HELLO,

I HAVE AN ACER NITRO 5 AN515-51 GAMING LAPTOP(INDIAN VERSION) RUNNING INSYDE H20 V1.13 REV 5.0 BIOS ATTACHED BELOW 

I WOULD LIKE TO UNLOCK ADVANCED SETTING IN THE BIOS AS ACER HAS WHITELISTED NVME SSD(ONLY M.2 SATA SSD WORK) SO PLEASE HELP GUYS

I KNOW MY BIOS IS WRITE PROTECTED AND I WOULD NEED SPI FLASHER/SOIC8 CLIP(WHICH I HAVE) SO I AM WILLING TO FLASH THE MODDED BIOS.

THANKS IN ADVANCE

BIOS

.bin   isflash.bin (Size: 8.76 MB / Downloads: 0)

My Lenovo S30 0568 did not boot and still on board screen display F2

$
0
0
Dears please help me 
My Lenovo s30 0568 did not boot and still on board screen display F2 code  two peep continuous
How this Happen 
1- I download the last firmware of bios the version from that can update from my windows 10, I installed the update as instruction and every think was OK, my PC restart and it boot very normal.
2- I downloaded the (Intel Management Engine Firmware Update Tool -  Systems for windows 7) and run it after less than a minute the tool got error and stop.
3- after that I install the software of Lenovo system update and run it, it download some package related to Intel engine or something like this, the tool ask for restart the pc, after restart, the pc boot with no screen and the code in board Lcd 62 code.
4- I do the reset Cmos procedure but the problem still.
5- I do the bios recovery from USB the screen show the bios recovery and update the bios done , the pc shutdown , I set the jumper to normal state but the pc boot with no screen again but the in board Lcd List "F2" with two peep and it hang in recovery mode while i reset the jumper in normal position 
So please help me to know what happen and what I do to solve this problem
Many thanks 

DNS A15fd (0164781) whitelist removal

$
0
0
Greetings

Maybe someone knows? Because in the Russian forum of this laptop there are no intelligible answers.

I'm trying to connect the Riser. I want to connect an external video card to the laptop through the wi fi socket, but the laptop does not see this port, and if I connect the adapter wi fi back to the laptop, the laptop sees it

sorry for mistakes

Thank

 My bios

BIOS Type AMI EFI
BIOS Version 508
SMBIOS Version 2.7
UEFI Boot Yes
System BIOS Date 03/15/2013
Video BIOS Date 12/23/11

Unlock GE72mvr BIOS (XMP)

My Lenovo S30 0568 did not boot and still on board screen display F2

$
0
0
Dears please help me 
My Lenovo s30 0568 did not boot and still on board screen display F2 code  two peep continuous
How this Happen 
1- I download the last firmware of bios the version from that can update from my windows 10, I installed the update as instruction and every think was OK, my PC restart and it boot very normal.
2- I downloaded the (Intel Management Engine Firmware Update Tool -  Systems for windows 7) and run it after less than a minute the tool got error and stop.
3- after that I install the software of Lenovo system update and run it, it download some package related to Intel engine or something like this, the tool ask for restart the pc, after restart, the pc boot with no screen and the code in board Lcd 62 code.
4- I do the reset Cmos procedure but the problem still.
5- I do the bios recovery from USB the screen show the bios recovery and update the bios done , the pc shutdown , I set the jumper to normal state but the pc boot with no screen again but the in board Lcd List "F2" with two peep and it hang in recovery mode while i reset the jumper in normal position 
So please help me to know what happen and what I do to solve this problem
Many thanks 

HP Pro 3400 MT - H61

$
0
0
Hey there, Actually I'd like to change my processor to an I7-3770 but my mobo is ans old one who support Sandy Bridge. After some research I found out that with an BIOS update we could make this compatible however I also found that my mobo was an OEM one from HP and that they did not support Ivy Bridge.

My motherboard is : Foxconn 2abf OR H-CUPERTINO2-H61 (OEM one)
BIOS : AMI 7.16, 23/03/2012

My Lenovo S30 0568 did not boot and still on board screen display F2

$
0
0
Dears please help me 
My Lenovo s30 0568 did not boot and still on board screen display F2 code  two peep continuous
How this Happen 
1- I download the last firmware of bios the version from that can update from my windows 10, I installed the update as instruction and every think was OK, my PC restart and it boot very normal.
2- I downloaded the (Intel Management Engine Firmware Update Tool -  Systems for windows 7) and run it after less than a minute the tool got error and stop.
3- after that I install the software of Lenovo system update and run it, it download some package related to Intel engine or something like this, the tool ask for restart the pc, after restart, the pc boot with no screen and the code in board Lcd 62 code.
4- I do the reset Cmos procedure but the problem still.
5- I do the bios recovery from USB the screen show the bios recovery and update the bios done , the pc shutdown , I set the jumper to normal state but the pc boot with no screen again but the in board Lcd List "F2" with two peep and it hang in recovery mode while i reset the jumper in normal position 
So please help me to know what happen and what I do to solve this problem
Many thanks 
Viewing all 25011 articles
Browse latest View live