I read Bastelfreund's former post--
"I have a Problem.
I changed the CPU in a Fujitsu Siemens Futro S450 to a Turion X2 TL-58 and in a S500 (nearly same Board) to a TL-60 for much more Power.
But both CPU only running with 800 MHz (like the normal CPU TF-20).
Is it possible to unlock the correct CPU-Speed by modifying the BIOS?
I uploaded the BIOS for you.
I'm really new at bios-modifying so please help me :-)
Thank you"
Can you solve this problem,because i have the same issue with turion x2 tl-50 processor(stuck at 800 Mhz) in a Fujitsu Siemens Futro s550?
Managed to unpack the OCF file with e_snipaw,but when i decompress it with phoedecw, drop me an error -Found an error in modules chain list!-.
So i stuck here.
Attached an original BIOS.
Thank you very much!
emuroland
![.zip]( "ZIP File")
FTS_FlashBIOSUpdateCompressedFlashFiles_600116_1041954.ZIP (Size: 468.37 KB / Downloads: 0)
"I have a Problem.
I changed the CPU in a Fujitsu Siemens Futro S450 to a Turion X2 TL-58 and in a S500 (nearly same Board) to a TL-60 for much more Power.
But both CPU only running with 800 MHz (like the normal CPU TF-20).
Is it possible to unlock the correct CPU-Speed by modifying the BIOS?
I uploaded the BIOS for you.
I'm really new at bios-modifying so please help me :-)
Thank you"
Can you solve this problem,because i have the same issue with turion x2 tl-50 processor(stuck at 800 Mhz) in a Fujitsu Siemens Futro s550?
Managed to unpack the OCF file with e_snipaw,but when i decompress it with phoedecw, drop me an error -Found an error in modules chain list!-.
So i stuck here.
Attached an original BIOS.
Thank you very much!
emuroland
FTS_FlashBIOSUpdateCompressedFlashFiles_600116_1041954.ZIP (Size: 468.37 KB / Downloads: 0)