Hi Everyone,
I recently made the mistake of purchasing some Ram that didn't meet the specifications of my mother board. I went ahead and installed it anyways. Long story short, the ram is rated at 1.9v and the ram slots of my motherboard are rated at 1.8v. I ran a memTest and it spews out a couple errors, the computer still seems to run fine. I was hoping to unlock my bios in order to change the memory voltage.
Any help would be appreciated.
Here is a CPUID Dump of my Computer - http://pastebin.com/8XiB0eE4
and a backup of my Bios attached to this thread.
Thanks for your help in advance.
PhoenixTechnologies,LTD-6.00PG.rom (Size: 2 MB / Downloads: 0)
I recently made the mistake of purchasing some Ram that didn't meet the specifications of my mother board. I went ahead and installed it anyways. Long story short, the ram is rated at 1.9v and the ram slots of my motherboard are rated at 1.8v. I ran a memTest and it spews out a couple errors, the computer still seems to run fine. I was hoping to unlock my bios in order to change the memory voltage.
Any help would be appreciated.
Here is a CPUID Dump of my Computer - http://pastebin.com/8XiB0eE4
and a backup of my Bios attached to this thread.
Thanks for your help in advance.
PhoenixTechnologies,LTD-6.00PG.rom (Size: 2 MB / Downloads: 0)