Hi I'm new in this forum and I came here with the hopes to add CPu Support for my Legacy Motherboard Biostar MCP6P M2+ .
The problem is that I'm Using a Phenom II x4 945 125W stepping and Is recognized by the motherboard but besides of receive the Warning of More than 95W Cpu, On windows the Cpu is Stucked at 800mhz.
I Suppose this is because the Cpu Microcode is not supported.
So here I give you the latest bios for the motherboard :
http://www.biostar.com.tw/app/en/mb/intr..._ID=422#dl
If you can add that or give me a guide of how to do it I will really appreciate that cause' its like having a Quad Core Pentium 3 haha.
Best regards from Argentina !
![.zip]()
61PCM630.zip (Size: 397.56 KB / Downloads: 0)
The problem is that I'm Using a Phenom II x4 945 125W stepping and Is recognized by the motherboard but besides of receive the Warning of More than 95W Cpu, On windows the Cpu is Stucked at 800mhz.
I Suppose this is because the Cpu Microcode is not supported.
So here I give you the latest bios for the motherboard :
http://www.biostar.com.tw/app/en/mb/intr..._ID=422#dl
If you can add that or give me a guide of how to do it I will really appreciate that cause' its like having a Quad Core Pentium 3 haha.
Best regards from Argentina !
61PCM630.zip (Size: 397.56 KB / Downloads: 0)