OMG IM RETARDED....AM2+/AM3 Geforce 6100pm-m2 v2.0 - 3.0 mod

so while hours of searching and modding my bios later i decide well the ami bios supplied by ecs is programmed for the mcp61 geforce nforce chipset aswell ive been getting around to thinking why dont i just flash with uniflash or with eeprom flasher the ami bios and then start the bios on the board see if it works low and behold it did and i have almost all settings unlocked whereas before i only had updated buggy cpu microcodes big thanks to bios-mods for teaching me similarities between chipsets etc the v2.0 ecs geforce 6100pm-m2 is now v3.0 making it am3 ready with support for 95 watt phenom ii x6 which is me next upgrade many thanks enjoy to whoever cares i can post confirmation for anyone who has doubts etc this will work if done correctly!!! Feel free to ask for instructions i know its a really old board but making it support newer cpus hopefully will help people see that bios modding is still relevant and possible now running overclocked phenom x3 at 2.5ghz while writing and seeing faster performance than my core 2 quad system...........any 1mb award bioses can probably become ami with a few tricks btw : .....   anyone wanting a confirmation just ask and ill post pictures of bios running thanks!!! and all the work i do i do for myself so i just share as a help out for whoever is playing with this old hardware some good tricks to know and also lolol im realizing alot of companies renamed am2 boards as am3 and updated to ami bios worth looking into!!! ive attached the bios i used you must use uniflash to flash or eeprom writer no other way make sure you are selected a 1/8mb flash rom or youll have issue booting and or going into bios other than that am3 support voila overclocking voila no more stupid ntune for me.....